How To Strap Paddle Board To Roof Rack
How to Ship Your Paddle Lath on the Roof of Your Machine
I of the most ofttimes asked questions our customer service team gets is, "How do I strap my paddle board to the roof of my car?" Strapping your stand upwards paddle lath to your car's roof may seem difficult at get-go, but one time yous have all the appropriate gear, this task will be a cakewalk.
To make your life easier, we've created a unproblematic step-by-step guide on everything y'all need to know on how to ship your paddle board to and from the water.
Important: This guide is mainly for those who own hard paddle boards (epoxy), not inflatable SUPs. Withal, y'all can strap your inflatable paddle board to your motorcar's roof (when inflated) by following the same steps below.
There are ii means to strap your paddle lath to your automobile and/or SUV:
- How to strap your SUP to your auto with a roof rack system
- How to strap your SUP to your car without a rack system
How to strap your SUP to your automobile with a paddle board roof rack arrangement
When we say, 'roof rack system' we are talking well-nigh metallic racks designed by companies like Thule & Yakima that typically don't come standard with your car. A brand new set of roof racks ranges from $150-$300. You will demand hard racks if you programme on taking your board on all walks of adventures — long road trips or immense highway travel.
Note: transporting your SUP without a roof rack system will non work/be condom if you plan on traveling far distances on the highway with your board.
TO TRANSPORT YOUR PADDLE Board, YOU Volition NEED:
Roof rack organisation installed on your machine
Soft surf pads and two tie-downward straps (longer pads are recommended because SUPs are wider than surfboards)
A towel or two to preclude harm if you lot plan on stacking multiple SUPs on your roof
FOLLOW THESE STEPS
one. Open VELCRO ON SOFT PADS AND SECURE TIGHTLY Around BOTH Bars.
2. LAY PADDLE Lath FACE DOWN (FINS Upward) WITH THE FIN TOWARD THE WINDSHIELD.
iii. LOOP A STRAP Nether THE CROSSBAR AND RUN BOTH ENDS (BUCKLE & TAIL End) Across THE TOP OF YOUR BOARD TO THE OTHER SIDE (Exist CAREFUL WITH THE BUCKLE END BECAUSE IT COULD DAMAGE YOUR Lath).
4. ON THE OTHER SIDE OF YOUR CAR, LOOP THE TAIL Finish Nether AND Effectually THE CROSSBAR.
5. INSERT THE TAIL END INTO THE BUCKLE (ALWAYS INSERT THE STRAP THROUGH THE Lesser OF THE BUCKLE) AND TIGHTEN. Once TIGHTENED ALL THE WAY, THE BUCKLE SHOULD Be POSITIONED Betwixt YOUR PADDLE BOARD AND YOUR Motorcar'S ROOF.
*Warning* When strapping soft top SUPs to the roof, y'all could possibly see indentation on the rails of your board from the straps. To alleviate, become a lath bag/sock or slide cardboard or EVA foam blocks betwixt your board and the straps for extra padding.
6. TWIST THE TIGHTENED STRAP So IT DOESN'T LAY FLAT AGAINST THE TOP OF YOUR Board TO Avert Boring BUZZING NOISES WHEN DRIVING.
7. LASTLY, Open up THE DOOR TO YOUR Auto, DROP THE REST OF YOUR STRAP'S SLACK INSIDE, AND SHUT THE DOOR ON BOTH Then THEY AREN'T Flying ALL OVER THE PLACE WHILE YOU ARE DRIVING.
8. Repeat STEPS 3-6 FOR THE SECOND STRAP.
How to strap a SUP to a car without racks
For those who don't have a hard rack arrangement, in that location is a way to strap your SUP board to your roof without hard racks. You can purchase soft racks at local surf shops that volition work just fine for your paddle board. However, this method is only good if you plan on transporting your SUP locally — this means driving 10 minutes through your boondocks/metropolis to your local paddle spot. Small-scale highway travel is OK (v-x min), merely don't push the boundaries of driving far distances at loftier speeds with just soft racks. You don't want to put your boards and other cars at risk of damage/injury.
Soft racks will fit anything from a small sedan to a larger SUV. Yet, soft racks volition not piece of work well with 2-door cars or minivans.
THESE ARE THE SPECIAL SOFT RACKS YOU Volition Demand
- Soft paddle board racks that come with straps
FOLLOW THESE STEPS
- Open all your car doors.
- Lay the soft racks across the pinnacle of your automobile so that the lesser straps will hang off at both sides of your vehicle.
- Infinite both pads across the roof of your machine (a few inches from the back windshield and few inches from the forepart windshield).
Annotation — If the soft racks are spaced too far apart, your boards can easily slip out. If they are too close together, your boards volition not be stable when driving.
- Once yous take the rack spacing dialed, take the two bottom straps from the soft racks, thread them through the open doors, and fasten them together on the inside of your automobile.
- Lay the paddle lath face down (fins up) with the paddle board fin toward the windshield.
- Tighten the pinnacle straps.
- Catch the two hanging top straps at the forepart and dorsum pads, pull them over the boards, and tighten them.
https://youtu.be/wIzExtSHK6k
Source: https://www.islesurfandsup.com/blog/how-to-strap-your-paddle-board-to-your-car/
0 Response to "How To Strap Paddle Board To Roof Rack"
Post a Comment